AirTag 2 Teardown: iFixit Shows All New Features

This article may contain affiliate links. Learn more on our Partner Program page.

Make Apfelpatient a preferred source One click – and you'll see us more often on Google

The AirTag 2 has recently been released and brings with it several technical improvements. While attention has recently focused heavily on Apple's quarterly figures, an important behind-the-scenes look has initially gone unnoticed: the teardown of the new tracker. This report picks up exactly where that leaves off, summarizing what's inside the AirTag 2 and what innovations Apple has implemented.

The repair and analysis portal iFixit completely disassembled the AirTag 2 and examined its individual components in detail. The goal was to highlight differences from the previous model and demonstrate how Apple has further developed the design, speakers, and tracking technology. The teardown complements previous analyses and provides additional details about the internal construction.

The exterior design remains virtually unchanged

At first glance, the AirTag 2 hardly differs from the original AirTag. Its form factor and basic design are practically identical. Apple is thus continuing to rely on the familiar, compact design of its item-tracking accessory. This decision ensures that existing accessories remain compatible.

Improved speaker with higher volume

One of the most noticeable changes inside the AirTag 2 is the redesigned speaker. According to Apple, it's up to 50 percent louder than the original AirTag. This should make the audible signal more noticeable when searching for a lost item. A previous teardown had already shown that the speaker in the AirTag 2 is significantly more difficult to remove than in the previous model. However, iFixit was able to demonstrate that it's technically possible to disable the signal tone. A soldering iron was used to disable the speaker. This shows that while Apple has improved tamper protection, it's not completely impenetrable.

Second-generation ultra-wideband chip

The AirTag 2 uses a second-generation Ultra Wideband chip. This chip is responsible for improved Precision Finding. Compared to the original AirTag, Precision Finding now works up to 50 percent further away from the target object. Additionally, the overall Bluetooth tracking range has been improved. This allows the location of an AirTag 2 to be determined more reliably from a greater distance, even when the target object is not in close proximity.

You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More information

Unblock content Accept required service and unblock content

Use within the Apple ecosystem

The AirTag is a small accessory that can be attached to keys, backpacks, or other items. Location tracking is done via the "Find My" app on iPhone, iPad, Mac, Apple Watch, and iCloud.com. This tight integration into the Apple ecosystem is retained with the AirTag 2 and continues to form the basis for location tracking.

AirTag 2: Setting up Precision Finding on the Apple Watch

Market launch of the AirTag 2

Apple released the AirTag 2 last month. Besides the louder speaker and improved Precision Finding, the greater range and optimized location tracking are among the key new features compared to the previous model.

AirTag 2 focuses on further development rather than change

iFixit's teardown reveals that while the AirTag 2 appears virtually unchanged externally, it boasts several targeted internal improvements. The louder speaker, new ultra-wideband chip, and extended range ensure more effective location tracking in everyday use. Overall, the AirTag 2 represents a logical evolution of Apple's existing concept, without fundamentally altering its proven design. For the best products: Our Amazon storefront offers a wide selection of accessories, including those compatible with HomeKit. (Image: Apple)